It takes a while generally, less than 1 second for this counter to stabilize. When a burst of traffic is received, the value in the output packet rate field might briefly exceed the peak cell rate.
Statistics for traffic received from and transmitted to the Routing Engine. Possible values are described in Interface Flags Field.
Specific information about the interface. Possible values are described in Device Flags Field. Specific information about the physical device.
#JUNOS SHOW INTERFACE ERRORS SOFTWARE#
If it does, it is most likely a software bug or possible broken hardware. The value in this field should never increment. Aged packets Number of packets that remained in shared packet SDRAM for so long that the system automatically purged them. Errors Sum of the outgoing frame aborts and FCS errors. If it does increment quickly perhaps, 1 every 10 secondsthen something is broken check the cable, the far end system, or the PIC. This number should not increment quickly, increasing, for example, only when the cable is unplugged or the far end system is powered down and up. Carrier transitions Number of times the interface has gone from down to up. The value in this field should always be 0. L2 mismatch timeouts Count of malformed or short packets that cause the incoming packet handler to discard the frame as unreadable. 元 incompletes This counter is incremented when the incoming packet fails Layer 3 usually IPv4 sanity checks of the header.įor example, a frame with less than 20 bytes of available IP header would be discarded and this counter would be incremented. Policed Discards Frames that the incoming packet match code discarded because they were not recognized or of interest. Errors Sum of the incoming frame aborts and FCS errors.